Rain-X: Helpful Tips and Information

Installation Instructions for Rain-X® Latitude

Select your wiper vehicle’s wiper arm below:

Replace the pre-installed Rain-X Latitude adapter with the P&H adapter provided in the package. Slide the post on the P&H adapter onto the large hold in the wiper blade frame. Push the adapter down into place on the frame.


Align the wiper blade perpendicular to the PH adapter arm. Place the wiper blade frame onto the PH arm pin. Rotate the wiper blade until the arm aligns with the wiper blade.


Replace the pre-installed connector with the connector provided in the wiper blade package. Click here for hints. Align your pin arm with the appropriate wiper blade frame hole. The smaller wiper blade frame hole fits 3/16" diameter pin arms and the larger frame hole fits _" diameter pin arms. Slide the wiper blade frame onto the pin arm until you hear a "click".


Replace the pre-installed connector with the connector provided in the wiper blade package. Click here for hints. Insert the bayonet arm into the connector until it "clicks" into place.
Align the large hole in the wiper blade frame with the P&H arm pin. Slide the wiper blade onto the P&H pin and rotate the wiper blade into place.

VERY IMPORTANT: For Rain-X Latitude wiper blades, remove the clear plastic protective cover from the squeegee.